DSL users, If you are required to enter a User Name & Password to access your DSL service, please call UTMI.net at 1-888-257-1042 regarding "Enabling PPPoE" prior to continuing with installation. Your DSL provider can tell you if this step is necessary.

STEP 1:  

With your modem and computer on, and using the Ethernet cable provided, connect the UTMI.net DSL modem to the Ethernet port on the back of your computer.

STEP 2:  

Power OFF your UTMI.net DSL modem, and wait one minute before powering in back ON.

STEP 3:  

Fully reboot your computer by powering it down and then turning it back ON. Confirm your internet connection is active.

DSL users, If you are required to enter a User Name & Password to access your DSL service, please call UTMI.net at 1-888-257-1042 regarding "Enabling PPPoE" prior to continuing with installation. Your DSL provider can tell you if this step is necessary.

Outbound calling is activated as soon as the UTMI.net VoIP adapter is connected. Inbound calling and Emergency dialing will take up to ten business days from your sign up date to be activated. UTMI.net will send you an email notification when these services are activated.

STEP 1:  

With your modem and computer on, and using the Ethernet cable provided, connect the DSL or cable modem to the WAN port on the back of the UTMI.net VoIP adapter.

STEP 2:  

Plug an Ethernet cable into the port labeled "LAN" on the back of the UTMI.net VoIP adapter and connect the other end of the cable into the Ethernet port on your computer.

STEP 3:  

Using a standard telephone cord, plug your phone into the "Phone 1" port on the UTMI.net VoIP adapter. Any touch tone phone will work with the UTMI.net VoIP adapter.

STEP 4:  

Connect the power adapter into the UTMI.net VoIP adapter and plug the unit into a power source. The UTMI.net VoIP adapter's power and WAN lights should be lit.

STEP 5:  

Power OFF your DSL or cable modem, and wait one minute before powering in back ON. This may mean unplugging the power source from the back of the modem. If it does not have an "off" switch. Leave the UTMI.net VoIP adapter on.

STEP 6:  

The UTMI.net VoIP adapter is ready when the light marked "VOICE" on the front of the UTMI.net VoIP adapter glows. The UTMI.net VoIP adapter may take up to ten minutes to register before the light glows.

STEP 7:  

Once the voice light on the UTMI.net VoIP adapter glows, fully reboot your computer by powering it down and then turning it back ON. Confirm your internet connection is active.

STEP 8:  

Make your first phone call to UTMI.net's Welcome number. Call 1-888-257-1042. You will hear how to log on to UTMI.net, set up your features and activate your voicemail.

DSL users, If you are required to enter a User Name & Password to access your DSL service, please call UTMI.net at 1-888-257-1042 regarding "Enabling PPPoE" prior to continuing with installation. Your DSL provider can tell you if this step is necessary.

STEP 1:  

With your modem and computer on, and using the Ethernet cable provided, connect the UTMI.net DSL modem to the WAN port on the back of the switch.

STEP 2:  

Plug an Ethernet cable into the port labeled "LAN" on the back of the switch and connect the other end of the cable into the Ethernet port on your computer.

STEP 3:  

Repeat Step 2 for each of your other computers.

STEP 4:  

Plug the switch into a power source. The switch's power and WAN lights should be lit (if applicable).

STEP 5:  

Power OFF your UTMI.net DSL modem, and wait one minute before powering in back ON. Leave the switch on.

STEP 6:  

Fully reboot each of your computers by powering them down and then turning them back ON. Confirm your internet connections are active.